1. Glazing: During the glazing process, the ordinary round mouth is dipped in glaze (dip the blank into the glaze pot, and it is raised immediately when the edge of the mouth is flush with the glaze) or glaze (inject the glaze slurry into the blank and shake it to make the top, bottom, left and right even Glaze, and then quickly drain off the excess glaze), cutlery (relative to "circle", "circle" refers to the round utensils formed by the blanking method, such as bowls, plates, dishes, etc.) and the molding process More complicated utensils, such as bottles, zun, pots, jars, etc., are called "cutters" or large round glazes (the method is to cover the bamboo tube with a fine yarn, dipped in the glaze and blow it with the mouth, so many times, You can get a glaze layer with uniform thickness on the blank surface).
2. Kiln burning: Kiln burning is a time-consuming step. The time course is about one day and night, and the temperature is around 1300℃. First build the kiln door, ignite and burn the kiln, the fuel is Songchai, guide the pile driver technology, observe the fire, master the temperature change of the kiln, and decide the time to stop the fire.
3. Color glaze: The color on the glaze, such as multi-colored, pastel, etc., is to describe the pattern and fill the color on the glazed surface of the fired porcelain, and then enter the red furnace to burn at low temperature, the temperature is about 700 ℃-800 ℃. In addition, before the kiln is painted on the green body tire, such as blue and white, glaze red, etc., called glaze red, which is characterized by color under high temperature glaze, never fade.
